Промивач автоматичний для мікропланшетів та стрипів DYNAWASH Automatic

It is an 8-channel automatic washing device for 96-well plates

Fully automated washer for conducting ELISA

• Small and compact

• Programming washing procedures using a PC

• Great flexibility in creating washing procedures

• Can be used for separate filling and aspiration functions of microplates

• Excellent price/quality ratio

Device features:

• The compact design of the device saves space in the laboratory.

• The working chamber inside the device is protected by a transparent cover, which protects laboratory personnel from aerosol.

• Any container can be used as a source of washing solution; there is no need for special bottles. The device can be used with 2 solutions (washing buffer and water) or with 4 solutions.

• The aspirated (waste) solution is collected in a waste container equipped with a safe level sensor. If the container overflows, the pump automatically stops, and the warning LED changes color from green to red.

• An automatic system washing procedure is provided after each washing cycle.

• The working area is illuminated during operation.

• Washing protocols are stored in the device and can be controlled directly from the control panel (membrane keyboard and graphic color display).

• The number of strips and the number of cycles for the washing procedure can be selected using the control panel.

Programming washing protocols

• Washing procedures can be pre-programmed by the user on an external PC. 4 functional steps: WASH, FILL, ASPIRATE, PURGE can be used to program washing procedures, either separately or in any combination. Each step can be repeated multiple times.

• The "Timing" function can be used for empty wells of microplates before washing the first strip and after processing the last strip (to ensure consistent washing time for different numbers of strips).

• The "Safe aspiration" function prevents cross-contamination (the aspiration needle does not contact the bottom of the well).

• The "Sweep mode" function allows the user to specify the number and position of aspiration points.

• DYNAWASH Automatic allows setting the "Soak time" period for each strip or plate.

• An automatic system washing procedure is provided after each washing cycle.

• Programmed washing protocols are transferred to the instrument via USB connection with a PC or using an SD card.

Technical specifications

• Number of channels per washing head - 8

• Number of liquid sources - 2 (optionally 4)

• Residual volume for flat microplates - <2 µl

• Reproducibility for filling 96 wells - <3.5% CV

• Variation in volume between channels A-H - <3.5% CV

• Dimensions - 260 mm x 360 mm x 165 mm

• Cat. Number 2 channel - D62222-E

• Cat. Number 4 channel - D62224-E